Irrespective of building type, the building owners are marching towards Outdoor Tiles Melbourne to elevate their building look with minimized investment. However, installing the outdoor tiles needs some proper preparation and guidelines for enhanced life and prolonged usage. If the outdoor areas are made up of different bases, they need to have corresponding installation procedures to properly fit the outdoor tiles. Let’s continue to stay on this page, in order to be aware of installation tips for different base levels of outdoor tiles.
Hardcore Base
Whenever your residential or commercial building has a hardcore base, you need to follow the mortar bed preparation for the effective installation of outdoor tiles Melbourne. Before installing the outdoor tiles, you need to mark and excavate the area of tiles installation and compact the area with whacker plate in layers. Later, you need to prepare mortar which need not be too runny to hold the outdoor tiles. Once you prepare the mortar preparation, you can make use of the best primer and apply it as a thin layer in order to hold the outdoor tiles. Starting from the corner, you need to install the primed tiles in the mortar preparation. Once it gets completed, you need to allow them to settle for at least 48 hours without any disturbance.
Concrete Base
For the concrete base installation, you may need concrete slab preparation which is nothing but a flat and dirt-free slab. For the proper installation of outdoor tiles in a concrete base, you require an adhesive and primer to ensure the sustainability and longevity of tiles. All you need to do is to create a mixture with water guided by the manufacturer in order to create highly adhesive elements for outdoor tile installation. Apply the adhesive on the concrete slab and install the tiles from the corner for effective installation. In order to improve its final look, you can remove the excessive adhesive from the surface and allow it to set before going for grouting.
Grass Or Gravel
Yes! You read that right, it is also possible to install the outdoor tiles over the grass and gravel in the residential and commercial buildings. Even though it is quite easy to install outdoor tiles on grass or gravel bases, it requires flush finishing in order to ensure a better aesthetic look. Place the tiles on the ground surface with equal space and dig out the soil to avoid damage to the surrounding lawn. Fill the ground with fine gravel carefully lay the tiles on the gravel and tap them perfectly to make it flat and stable. For the grass or gravel base, you need not perform joining or grouting compounds.
Over Raised Pedestals
The last and most popular base which is suitable for Outdoor Tiles Melbourne installation is nothing but over raised pedestals. During the installation of outdoor tiles, you have to make sure of the proper water drainage and use a stable subfloor for proper installation of outdoor tiles. Once you have installed the outdoor tiles and pedestals, you are all set to complete the outdoor tile installation. But the ultimate concern while installing outdoor tiles in over raised pedestals is to ensure the substrate beneath for proper water drainage and rainwater. These are some of the installation guidelines, you can follow for different bases for effective installation of outdoor tiles.
Comments are closed.